Pretreatment agents
Al Clean #300
A weak, alkaline
degreasing agent
for the use with
the aluminum
As a weak alkaline and as a degreasing agent for the use with the dippings
of the aluminum and the alloys, the Al Clean #300 is a product that has the
excellent degreasing ability. Especially, if it is used before the anodizing
(almite) treatment of an aluminum alloy, in the caustic soda and nitric acid
treatment in the next process, the uniform etchings are possible.
The Al Clean #300 does not corrode or discolor the aluminum material,
and it is a non-silicate product.
description
As a powder type, the Al Clean #300 is packaged and sold in the unit of 20kg/bag.
special features
- As a low-bubbles product that gets dissolved well in the water, compared to the other degreasing agents, the contamination of the washing water due to the bubbles is a little.
- When applying to a product regarding which the 2nd anodizing is being done, because it does not give any influence on the surface of the 1st anodizing, the use after the processing of the product that had been 1st anodized and before the 2nd anodizing is suitable.
treatment process
STEP.1
AI Clean
#300
STEP.2
pretreatment
(etching,
polishing, etc.)
STEP.3
anodizing
STEP.4
dyeing
STEP.5
sealing
STEP.6
rinsing
STEP.7
drying
PRODUCT
Pretreatment agents
Al Clean #300
A weak, alkaline degreasing agent for the use with the aluminum
As a weak alkaline and as a degreasing agent for the use with the dippings of the aluminum and the alloys, the Al Clean #300 is a product that has the excellent degreasing ability. Especially, if it is used before the anodizing (almite) treatment of an aluminum alloy, in the caustic soda and nitric acid treatment in the next process, the uniform etchings are possible. The Al Clean #300 does not corrode or discolor the aluminum material, and it is a non-silicate product.
description
As a powder type, the Al Clean #300 is packaged and sold in the unit of 20kg/bag.
special features
- As a low-bubbles product that gets dissolved well in the water, compared to the other degreasing agents, the contamination of the washing water due to the bubbles is a little.
- When applying to a product regarding which the 2nd anodizing is being done, because it does not give any influence on the surface of the 1st anodizing, the use after the processing of the product that had been 1st anodized and before the 2nd anodizing is suitable.
treatment process
- STEP.1
Al Clean #300 - STEP.2
pretreatment
(etching,
polishing, etc.) - STEP.3
anodizing - STEP.4
dyeing - STEP.5
sealing - STEP.6
rinsing - STEP.7
drying